A 1000kN horizontal tensile test machine is intended for high-load long rod insulator testing where sample length, fixture movement and safe handling are as important as force capacity.
For buyers comparing tensile testers, the useful questions are load range, stroke, loading speed, sensor accuracy, tail-stock movement, protection cover and reporting.
Source facts used
- Load range of the testing machine is 1000kN.
- Test accuracy is listed as 1%FS.
- Load sensor range is 1000kN.
- Piston stroke is 600mm.
- Loading speed is 0-200mm/min and can be set according to test requirements.
- Middle rail section is 300mm and allows the tail stock to move with self-lock function.
- Control system automatically tracks force and displacement.
Load rating and sensor range
The brochure lists both machine load range and load sensor range as 1000kN, with 1%FS accuracy.
Buyers should compare this against the specified mechanical failing load and any proof-load or routine-test requirement.
Stroke and loading speed
A 600mm piston stroke and 0-200mm/min adjustable loading speed give flexibility for different test procedures.
The ability to set loading speed and pressure-holding time helps align the machine with customer procedures.
Long-sample handling
The 300mm rail section and movable self-locking tail stock help adjust to long rod samples.
Protection cover and air-supporting structure improve operation and safety around high-load failure risk.
Buyer checklist
- Maximum tensile load
- Sample length
- Fixture type
- Piston stroke
- Loading speed
- Data recording
FAQ
Why horizontal instead of vertical?
Horizontal layout is usually more practical for long rod samples because it supports length and handling.
Is 1000kN always necessary?
No. The load should match the product rating and test method, with a reasonable safety margin.
Need a practical recommendation? Send product drawings, voltage class, test standard, sample size and destination country through the Contune contact page.