Knowledge Center

IEC 62217 Water Diffusion Test for FRP Core Rods: Equipment, Workflow and Report Checklist

September 10, 2026

IEC 62217 Water Diffusion Test for FRP Core Rods: Equipment, Workflow and Report Checklist

Water diffusion testing evaluates whether a glass-fibre-reinforced polymer (FRP) core for a composite insulator can resist moisture-related degradation. It is not simply a boiling bath or a dielectric tester. The workflow combines water conditioning, controlled voltage application and leakage-current observation. This guide uses verified details from Contune’s water diffusion test equipment brochure. Specimen dimensions, conditioning […]

Weber Knowledge Center

How to Prepare an RFQ Package for an Insulator Testing Machine

September 9, 2026

How to Prepare an RFQ Package for an Insulator Testing Machine

Prepare a complete RFQ for an insulator testing machine with sample drawings, standards, load or voltage scope, fixtures, programs, reports and site utilities.

Weber Knowledge Center

IEC 60587 Tracking and Erosion Test: Pre-Run Checklist and Report Fields

September 6, 2026

IEC 60587 Tracking and Erosion Test: Pre-Run Checklist and Report Fields

Prepare an IEC 60587 tracking and erosion test with checks for specimens, electrodes, contaminant flow, voltage, current, safety interlocks and report records.

Weber Knowledge Center

Combined Tensile, Cantilever and Torsion Test Machine Acceptance Planning

August 31, 2026

Combined Tensile, Cantilever and Torsion Test Machine Acceptance Planning

Plan FAT and commissioning for a combined tensile, cantilever and torsion tester: load ranges, fixtures, alignment, programmable sequences, calibration and reports.

Weber Knowledge Center

Long Rod Insulator Tensile Test Fixture Alignment and Sample Handling

August 27, 2026

Long Rod Insulator Tensile Test Fixture Alignment and Sample Handling

A practical guide to long rod insulator tensile-test fixture alignment, sample support, loading speed, stroke, force/displacement records and safety acceptance.

Weber Knowledge Center

Wet Flashover Test Room Preparation for Porcelain, Glass and Polymer Insulators

August 25, 2026

Wet Flashover Test Room Preparation for Porcelain, Glass and Polymer Insulators

Plan a wet flashover test room for porcelain, glass and polymer insulators: AC source, divider, resistor, control zone, grounding, spray interfaces and RFQ data.

Weber Knowledge Center

Thermal-Mechanical Test Report Template for String Insulators: Load, Temperature and Cycle Records

August 24, 2026

Thermal-Mechanical Test Report Template for String Insulators: Load, Temperature and Cycle Records

How to specify thermal-mechanical test reports for string insulators, including four 24-hour cycles, load, temperature, fixtures, alarms and acceptance records.

Weber Knowledge Center

150kV to 250kV AC Voltage Test Laboratory Layout for Insulator Manufacturers

August 14, 2026

150kV to 250kV AC Voltage Test Laboratory Layout for Insulator Manufacturers

Planning notes for 150kV to 250kV AC voltage test laboratory layout, including transformer, divider, resistor, safety and buyer RFQ requirements.

Weber Knowledge Center

Composite Insulator Crimping Fixture Preparation for End Fitting Reliability

August 14, 2026

Composite Insulator Crimping Fixture Preparation for End Fitting Reliability

A buyer-focused guide to composite insulator crimping fixture preparation, end fitting drawings, pressure data, displacement and acoustic emission monitoring.

Weber Knowledge Center

1000kN Horizontal Tensile Test Machine FAT Checklist for Long Rod Insulators

August 10, 2026

1000kN Horizontal Tensile Test Machine FAT Checklist for Long Rod Insulators

Factory acceptance checklist for a 1000kN horizontal tensile test machine for long rod insulators, covering stroke, speed, rails, controls and reports.

Weber Knowledge Center